programming grids
------------------------
1. use atmega AVRISP MK2 and usb.
2. use atmelstudio 7.0
3. choose in device programming: atmega328p
4. upload under 'memories', the bootloader for grids
5. change the fuses,
05
DE
FF

Then Program the chip again.

it will warn about changing the clock, it is okay. Go ahead .
6. Last program with the GRID.HEX

Common trouble shooting: If you dont do the fuse programming, the grids module will only clock
and none of the other features will work. You must do the fuses programming.

Modern AVRISP MK2 is able to supply 5.0v, there is no need to power up the
Grids MOdule using the Euro Ribbon Cable. You might have change jumpers on your
AVRISP MK2 programmer from 3.3V to 5V.

The grids.hex in both folders are the same, I just placed a copy in the bootloader
to make it easier since you have to program both any how.